Crack Before Repair	Crack After Repair
Thread Repaired	Thread Stress Test
Ear Before Repair	Ear After Repair

ADVANTAGES OF HTS-2000 OVER WELDING:

1. Cost of Equipment � No argon gas, wire spool, gloves, shield, or electricity required.
2. Portability � Stores easily, along with small torch.
3. Skills Needed � Simple instructions virtually anyone can use. No flux, chemicals, or special cleaners required. 100% guaranteed.
4. Danger � No high voltage electricity used.
5. Oily Aluminium � Heli-arc boils aluminium and any impurities below the surface must be brought to the top and cleaned off.
6. Thin Aluminium � Melts 260�C before aluminium.
7. Different Alloys � Works with any alloy of aluminium or cast aluminium.
8. Time Involved � Makes many repairs much quicker than conventional methods.
9. Filling Holes � Instantly fills any size hole for threads much stronger than the original threads.
10. Versatility � One product fills cracks or holes, rebuilds ears, seals leaks, or permanently bonds flat pieces.

Guaranteed to be the finest metal repair in the world!

Check out our demonstration videos to see how you can use HTS 2000 Aluminium Brazing Rods